In this phase, changing the name of previously generated projects are demonstrated in Spinstudio. Open Spinstudio software Find the previously generated projects in the list ‘Load recent project’ below and…
Once a project has been opened or created, spinstudio opens the Settings application. If the system is properly connected, Each powered system is indicated with green checkmark (here, spincube and…
If you are experiencing connection problems with spincube after a project was opened or created, you may reconnect spincube. Identifying a connection problem Before proceed, check your system’s connection status.…
This article is a step-by-step quick guide for the simplest fiber deposition method. This guide assumes that you already have the proper precursor liquid (e.g. a polymer solution) prepared. We…
To start working with spinstudio it is essential to either: Open a project from disk (B2) or Load recent project (B3) or Create a project from template (B4) or Create…
Upon launching the spinstudio software the Home screen is displayed. On the left Menu bar is visible: A1 – Home button (return to the spinstudio Home screen) A2 – Settings…
System overview The spincube electrospinning system consists of the following elements: S1 – spincube power S2 – spincube chamber S3 – spincube pumps S4 – PC with installed spinstudio The…