How Can We Help?
Troubleshooting
| Description | Resolution |
| The HV ON button is pressed, but I am still unable to activate the high voltage. | Makre sure that the chamber door is closed.
Make sure that the chamber controller F11 is connected properly yo both: the chamber and the cubepower. |
| Disabled voltage drops, after the high voltage is activated. Overcurrent indicator is turned on. | Decrease the voltage or rearrange the electrospinning setup, e.g., increase the emitter-collector distance. |
| Droplet formation is not stable – droplet is fluctuating. | Decrease the voltage or increase the flow rate. |
| Droplet size is constantly increasing and drips. | Decrease the flow rate or increase the voltage. |