Hydrodrive

Hydrodrive consists of several components: syringe driver (a) placed inside the chamber, linked to the polymer holding syringe (c) with connected emitter needle (b). The syringe driver is actuated by a syringe pump (d) with an external syringe (e). In case of loss of hydraulic liquid, the system can be refilled from an external tank (F15) through the tap valve (F16).

The system is built to last, but a minimal oil film could appear over time on the pistons, this is normal. There is some oil reserve at the back of the chamber for both channels, so the normal oil loss can be replaced over time (months) if needed.