Display online data

Monitoring the measurement data in real time is only available while you are recording the measurement data. See the article Start data tracking.

1. Go to Live Data (1) on the Menu bar.
2. While in the Live Data view, you can choose to do the following:

• Change name of the file with the sensor readings (C1).
• Select a sensor module (C2) from the Modules list to display its data on the graph (C3). Due to all measurement data originating only from sensor modules, the modules containing the sensors (like spincube chamber, spincube power, cubepump) and the modules without dedicated sensors (camera) are disabled on the Modules list.
• Change the number of the displayed data points (equals to changing the displayed time window) (C4).

Tip: Data files are saved with your project. If you want to access your measurement data later, make sure you save your project, otherwise your recorded data will be lost when you close the project.