Connecting Modules to Template

Note: for notations like ‘B4’ please refer overview of spinstudio interface.

1. Open Spinstudio software
2. Select the corresponding template (B4) to generate a new project or load the desired project generated previously.
3. The ‘Modules in Project’ column (3A) contains the available module types listed. Click on the corresponding type, then all the licensed modules appear in the ‘Licensed Module’ column (3B).

   Note: Applying ‘Instrument filter’ (3C) function, the corresponding instrument-dedicated modules are listed.

4. Select the Electrospinning Chamber from Modules in Project column (4A). After clicking the licensed modules appear in Licensed module column, then double click on the available spinCube Chamber module (4B). When it is ready the module name is marked by green checkmark (4C).
   
5. Repeat ‘Step 4’ in case of the Camera, High Voltage Supply and the Precursor pump module. Make sure that there are no warnings or errors related to the modules and each module name is marked by green checkmark.