Setting up the spincube power

1. To set up the spincube power go to Settings in the Menu bar (1).
2. Select spincube from Your systems and choose spincube power from the module list (2).
3. If you are continuing your work with spinstudio project you can upload previous settings, by using Continue with the latest settings button. If you want to insert new settings, choose Initialize settings (3).

As the last step configure power specific settings (4):

• Enable remote control – to enable controlling the spincube power voltage from spinstudio, switch the control on the Settings page to ON, then confirm the setting by pressing and holding the physical button labeled “Remote control” on the front of the power module. A more detailed description of the Remote control function is available here: Turn on Remote Mode
• High voltage limitation – active only in remote mode. Changes the upper voltage limit for the power supply. Default value is 40 kV.
• Voltage fine tune resolution – changes the increment of the voltage setting. There are three options: Normal (0.5 kV), Fine (0.05 kV), Very fine (0.005 kV).

To restore default values to all configuration controls, use the Reset button.