Using the spincube camera dashboard interface

1. Select Dashboard (1) on the Menu bar.
2. Select camera module on the list, then right click (2) and place it on the Dashboard. Make sure the correct module is highlighted in the list. Place the module’s interface on the Dashboard with a left click on an unoccupied space on the Dashboard after selecting Place on dashboard.
3. The camera module’s interface (3) is now on your dashboard showing the camera picture in real time. Now you can:

• • Left click on it to zoom in
  • Right click and choose:
    • Zoom to fit: zoom back out
    • Move: drag the interface elsewhere on the dashboard
    • Delete: remove interface from the Dashboard
      

If you experience tearing of the picture or blackouts, consider setting the framerate to Normal instead of Fast on the Settings interface of the camera. Tip: you can access the Settings interface of a module if you select it in the Modules list, then right click and choose Settings. This will take you directly to the highlighted module’s Settings.