Using the spincube chamber dashboard interface

1. Select Dashboard (1) on the Menu bar.
2. Select the spincube chamber module on the list, then right click (2) and place it on the Dashboard. Make sure the correct module is highlighted in the list. Place the module’s interface on the Dashboard with a left click on an unoccupied space on the Dashboard after selecting Place on dashboard.
3. The chamber module’s interface (3) is now on your dashboard. The display of the controls and indicators on the interface can be turned on and off in the Settings of the chamber module. The rotation control is enabled only when you have a Rotation collector installed.

   

Tip: you can access the Settings interface of a module if you select it in the Modules list, then right click and choose Settings. This will take you directly to the highlighted module’s Settings.